コンテンツにスキップ
🖥️ テック必需品セール | 最大50%オフ
JAPAN
カート
Frequently Asked Questions

General

How many independent external displays can I connect using the ALOGIC DV3 dock?
The ALOGIC DV3 Docking Station supports up to two independent external displays at Full HD resolution (1920x1080 @ 60Hz). You can connect two HDMI monitors or one HDMI and one VGA monitor. If you plug in three displays simultaneously (2x HDMI + 1x VGA), the VGA port will mirror the video output of one of the HDMI ports.
Will the DV3 dock support multiple external monitors on base Apple M1, M2, and M3 MacBooks?
Yes. Standard M1, M2, and M3 MacBooks natively limit external monitor output to a single screen over USB-C. Because the ALOGIC DV3 is built with DisplayLink technology, installing the free DisplayLink driver allows base Apple Silicon MacBooks to run two extended Full HD displays.
Does the ALOGIC DV3 dock come with a power supply, and can it charge my laptop?
The DV3 is a compact, bus-powered 12-in-1 dock and does not include a power adapter in the box. It can run off your laptop's battery for on-the-go connectivity. For laptop charging, plug your laptop's original USB-C charger or a USB-C PD charger (up to 100W) into the dock’s dedicated USB-C PD port. The dock reserves ~15W to power itself and attached peripherals, passing up to 85W Power Delivery to your computer.
Can I use the DV3 dock with an older computer that only has USB-A ports?
Yes. The ALOGIC DV3 includes a USB-C to USB-A adapter. When connected via USB-A, DisplayLink technology enables dual external display output alongside full access to Ethernet, card readers, and USB peripheral ports. Pass-through laptop charging is not available over legacy USB-A ports.
Do I need to install software or drivers to use the DV3 dock?
Yes. Installing the free Synaptics DisplayLink driver (available for macOS, Windows, and ChromeOS) is required to enable dual-display output across all laptop models regardless of hardware video output limits.
What ports are available on the ALOGIC DV3 12-in-1 Docking Station?
"The ALOGIC DV3 Dock provides 12 essential connections:
Video: 2x HDMI ports and 1x VGA port (1080p @ 60Hz).
Data Transfer: 1x 5Gbps USB-C port and 1x 5Gbps USB-A 3.2 Gen 1 port.
Peripherals: 3x USB-A 2.0 ports (ideal for wireless keyboard and mouse dongles).
Networking & Power: 1x RJ45 Gigabit Ethernet port (1Gbps) and 1x USB-C PD input port (100W max input).
Storage: SD and MicroSD card readers."

一般的な

このドックを使用するには電源アダプターが必要ですか?
このドックは、ホスト コンピューターの USB ポートから電力を受け取り、電源なしで使用できますが、接続された周辺機器に利用できる電力は、ホスト コンピューターが提供できる電力に制限されます。電力を多く消費するデバイスがドックの USB ポートに接続されている場合、コンピューターの上流の USB ポートが供給できる電力を超過した結果、ドックが不安定になったり、シャットダウンしたりすることがあります。

最高のエクスペリエンスと信頼性を得るために、電源アダプターをドックに接続することをお勧めします。電源アダプターを接続すると、USB Power Delivery パススルーを使用して接続されたコンピューターをドックから充電することもできます。

このドックは USB-C Power Delivery (USB PD) 電源入力を備えており、適切な定格の USB PD 電源を使用してドックと接続されたラップトップに電力を供給できます。 ALOGIC は、このドックで使用する優先電源アダプターとして DCG1X100 100W 急速電力 GaN 充電器を推奨します。

ドックは、接続された電源アダプターから 15 W を確保して、ドック自体と接続されている周辺機器に電力を供給し、残りの電力を接続されたコンピューターに渡します。そのため、このドックに接続したときにコンピューターを可能な限り高速で充電するには、コンピューターに付属の電源アダプターより少なくとも 15 W 高い出力を持つ USB PD 電源アダプターを使用することをお勧めします。 100W USB PD 電源アダプターを使用すると、ドックは接続されたラップトップに最大 85W の電力を供給できます。
DV3 には追加のソフトウェアのインストールが必要ですか?
DV3 は DisplayLink 対応ドックです。https://www.synaptics.com/products/displaylink-graphics/downloads から無料でダウンロードできる DisplayLink ソフトウェアをインストールすることをお勧めします。
DV3 と互換性のあるラップトップは何ですか?
DV3 は、Windows、MacBook (M1 MacBook も)、Chromebook と互換性があります。

互換性

私のラップトップには Thunderbolt 3 または 4 ポートがあります。ラップトップで DV3 ドックを使用できますか? - DUCDDV3
Thunderbolt 3 および 4 ポートは、USB-C ポートと同じコネクタを使用します。 DV3 ドックは Thunderbolt 3 または 4 ポートで使用できますが、Thunderbolt のデータ速度を達成することはできません。 注: Thunderbolt 2 ポートは異なる物理コネクタを使用するため、互換性がありません。

トラブルシューティング

左側の HDMI ポートが機能しない、またはビデオ出力が表示されないのはなぜですか?例えば。トリプル外部ディスプレイへの出力はできません。
DV3 の左側の HDMI ポートは Display Alt です。モードパススルーポート。この左側の HDMI ポートを介してビデオ信号を渡すには、ホスト ラップトップに Display Alt Mode をサポートする USB-C ポートが必要です。

: DV3 で USB-A アダプタを使用すると、左 HDMI ポートも無効になり、ディスプレイ出力が 2 つの外部ディスプレイ (右 HDMI と VGA) のみに制限されます。
外部電源アダプターを DV3 に接続していますが、ラップトップの充電機能が動作しません。
ラップトップの充電機能が動作していることを確認するには、エンド ユーザーは以下を備えている必要があります。

DV3 の PD ポート経由で接続する外部 USB-C 電源アダプタ
ホストのラップトップは USB-C コネクタ ケーブルを使用する必要があります
ホストのラップトップには電力供給をサポートする USB-C ポートが必要です


注: ドックは外部電源アダプターから最大 8 W を消費する場合があります。使用する外部電源アダプタにラップトップに電力を供給するのに十分な電力があることを確認してください。